Favorite Tips About How To Clean Slr Body

To clean the mirror itself, hold the camera so that the front is facing down and gently blow on the mirror with your blower.

How to clean slr body. If you applied too much, just. Pay particular attention to areas like the lens. If you want to get rid of excess alcohol, press the swab on to tissue paper.

Use a large brush for the camera exterior and a small brush to reach corners and delicate parts. Repeat the test in tip 2 to see the results. Use light strokes to flick the dirt away.

Hold the camera with the lens mount pointing down, then blow air up into the camera. The cross section of a dslr camera differs primarily in internal component construction; Take 70/30 of alcohol and put it in water.

Wipe the rust debris away from the camera body with a cotton swab soaked in denatured alcohol. We wipe it with a damp cloth, allow the. A piece of dry microfiber cloth mostly (to absorb moisture or grease) and if too much sweat after shooting in hot day, a.

Under the force of gravity. Best way to clean camera bodies and lens barrels. Use gentle pressure to wipe the lengthways of the mirror.

The sensor should now be clean. Dislodged dust will then drift down. You want just enough fluid to dampen the cloth, but not enough for it to drip into the camera.

Screwdriver (optional) magnifying glass (optional) step 1. Clean the surface you are going to work on. In this video i go through the steps on how i maintain and clean my nikon d5100 dslr camera.

To start, wipe down the body of your camera. Use the brush to sweep away any loose dust or dirt from the camera surface. Use a brush to remove dust.

One tip from my local camera shop is to use denatured alcohol and an old toothbrush to scrub off stubborn stains. Drip a drop or two of cleaning fluid into the swab. This will remove any loose.